How to add the service life of perforated three shaker mattress? Remember these eight points!
1. Timely adjustment of direction: After the newly purchased mattress is put into use, it is necessary to perform flipping movements in the front back direction and up and down direction every three months for the first year, so that each part of the mattress is evenly stressed and the service life of the mattress is increased.
2. Persist in air circulation: In order to ensure that the materials inside the mattress are not damp and to increase the comfort of the mattress, it is necessary to maintain air circulation in the room where the mattress is used.
3. Avoid single point jumping or fixed-point heavy pressure on the mattress, and avoid standing or doing single point jumping or fixed-point heavy pressure on the mattress. This will cause uneven stress on the mattress, and prolonged sitting on the edge should also be avoided to shorten the service life of the mattress.
4. Do not use water to clean the mattress: In case of liquid pouring and penetrating into the inner layer of the mattress, do not use water to clean. Immediately use a cloth with strong moisture absorption to squeeze it until it is absorbed, and then use a hair dryer with cold and warm air (hot air is strictly prohibited) or an electric fan to dry it. In addition, do not use dry cleaning solution to clean the bed surface, as this may damage the fabric surface.
5. Do not smoke in bed or place the mattress near flames.
6. Use cleaning pads: To ensure the hygiene of the mattress, cover the cleaning pads before wrapping the bed sheets.
7. Collaboration between top and bottom pads: Do not place boards between top and bottom pads or place top pads on damaged old mattresses. You can purchase matching bottom pads to extend the lifespan and sleep comfort of the new mattress. If the mattress surface is contaminated, it can be wiped with alcohol in a timely manner.
8. Careful handling: When handling, the mattress should be placed on a straight surface and not folded or bent, as this will damage the fixed frame of the mattress and cause it to distort and deform. Never place the mattress twisted or folded on the transport vehicle. If the mattress comes with handles, do not use them for transportation as they are used to adjust orientation.
